Phrozen Aqua Hyperfine 3D Printing Resin

Category	Property	Norm	Typical Values
General Properties	Appearance	-	Graphite / Blue / Green / Red / Purple
	Viscosity, 30 Cone/Plate Rheometer¹	Cone/Plate Rheometer¹	300–350 mPas
	Density (liquid resin)	ASTM D4052-18a	1.15 g/cm³
Tensile Properties	Tensile Strength at Break	ASTM D638	32.3–38.7 MPa
	Tensile Modulus	ASTM D638	1614–2104 MPa
	Elongation at Break	ASTM D638	2.9–6.6 %
Impact Properties	Notched Izod (Machined), 23 °C	ASTM D256	36.5–45.9 J/m
Thermal Properties	HDT at 0.45 MPa	ASTM D648	57.7–61.7 °C
Hardness	Shore D	ASTM D2240	75–86D

Notes:

• All testing specimens are printed using Phrozen Sonic Mighty 8K or Sonic Mini 8K, and post-cured using Phrozen Wash & Cure Kit.
• Specimens are printed unless stated otherwise.
• The information in this TDS, including product recommendations, is based on current knowledge and experience. Descriptions, drawings, photographs, data, proportions, weights, etc., provided may change without notice and do not establish the product's contractual quality. For further information or the relevant MSDS, contact Phrozen Tech Co., Ltd at sales@phrozen3d.com.

 

Downloads:

• User Guide - TDS, Parameters, cleaning and Curing
• SDS-Phrozen - Aqua Hyperfine,Blue.
• SDS-Phrozen - Aqua Hyperfine,Purple.
• SDS-Phrozen - Aqua Hyperfine,Graphite.
• SDS-Phrozen - Aqua Hyperfine,Green.
• SDS-Phrozen - Aqua Hyperfine,Red.

 

Tips:

• Ensure the resin is stored at ambient temperature, in a place that is dark and well-ventilated.
• Once printed, transfer any remaining resin into a sealed, non-transparent container.
• Do not combine previously used resin with fresh resin.
• Prevent resin access by children and protect it from direct sunlight.
• Utilize protective gloves and masks during resin handling.
• In case of skin or eye contact with the resin, rinse thoroughly with abundant water. Avoid disposing of resin as liquid waste.
• Dispose of cured resin as you would with regular plastic waste.